Products

  • 0
  • 0

Influence of Viscosity and Fineness of Hydroxypropyl Methyl Cellulose on Mortar Properties

U.S. natural gas futures rose about 5 percent to a near nine-week high as global energy prices surged on concerns over a pricing plan for energy exports, keeping U.S. LNG export demand near record highs. U.S. natural gas prices have risen despite forecasts of mild weather and lower-than-expected demand, which will allow utilities to fill up storage facilities next week. On Wednesday, Germany launched an emergency plan to manage gas supplies in Europe's largest economy. If natural gas supplies are interrupted or stopped, the German government could take unprecedented steps to limit electricity supply.
Affected by the increase in the price of natural gas, the price of the HPMC will also increase.

Viscosity and fineness are important indicators that affect the performance of hydroxypropyl methylcellulose HPMC. Studies have shown that the water retention effect of HPMC increases with the increase of its viscosity, but after the viscosity exceeds 40000 MPa•s, the water retention increases limited with the increase of viscosity. The higher the viscosity, the larger the molecular weight of HPMC, and the corresponding decrease in solubility. It will not improve the water retention of mortar, but it will have a negative impact on strength and workability. Comprehensive consideration, it is more appropriate to use cellulose ether with a viscosity of 40000 MPa•s in the cement mortar.


As the HPMC particles gradually become finer, the water retention of the mortar is also improved to a certain extent. Fineness affects the solubility of HPMC. Coarse HPMC dissolves very slowly in water and should not be used in dry mix mortars. In dry-mix mortar, HPMC is dispersed between aggregates, fine fillers and cementitious materials such as cement, and only a fine enough powder can prevent it from caking when mixed with water. When HPMC is added with water to dissolve the agglomerates, it is difficult to re-disperse and dissolve. HPMC with coarse particle size is not only wasteful, but also reduces the local strength of the mortar. When such dry-mixed mortar is used in large-scale construction, the curing speed of the local mortar may be significantly reduced, which may cause uneven hydration of the cementitious material. of cracking. For mechanically constructed spray mortars, due to the shorter mixing time, the requirements for the fineness of HPMC are higher. Therefore, after comprehensive consideration, the particle size of cellulose ether used for cement mortar should be less than 80 μm.


It can be seen that HPMC is a high-efficiency water-retaining agent for dry-mixed mortar, which reduces the bleeding rate and stratification of the mortar, and improves the cohesion and sag resistance of the mortar. Although HPMC slightly reduces the flexural and compressive strength of mortar, it can significantly improve the tensile strength and bond strength of mortar. In addition, HPMC can effectively inhibit the formation of mortar plastic cracks and reduce the mortar plastic cracking index. The water retention of mortar increases with the increase of HPMC viscosity, and when the viscosity exceeds 40000MPa•s, the water retention does not increase significantly. The fineness of HPMC also has a certain influence on the water retention rate of the mortar. When the particles are finer, the water retention rate of the mortar increases. The particle size of HPMC usually used for cement mortar should be less than 80μm.


TRUNNANO is a concrete additives supplier with over 12 years experience in nano-building energy conservation and nanotechnology development. We accept payment via Credit Card, T/T, West Union and Paypal. Trunnano will ship the goods to customers overseas through FedEx, DHL, by air, or by sea.

If you are looking for high quality HPMC, please feel free to contact us and send an inquiry.

sales@cabr-concrete.com




In 2021, Russia's palladium, nickel and aluminum exports will account for 24.6%, 21.9% and 9.9% of the global total, respectively. Russia exported 2.819 million tons of palladium, accounting for 43.37% of global HPMC with low price fluctuation range and excellent quality, click here will be a good choice.

Inquiry us

Our Latest Products

Application of Nitinol Powder

Nitinol is a shape memory alloy, a special alloy that can automatically restore its plastic deformation to its original shape at a certain temperature. It can meet the needs of various engineering and medical applications and is an excellent function…

The preparation method of lithium sulfide

Lithium sulfide, molecular formula: Li2S, lithium sulfide, molecular weight: 45.95. White to yellow crystals. With an anti-fluorite structure.…

How is lithium 12-hydroxystearate produced?

Lithium 12-hydroxystearate is widely used in lubricants, stabilizers, bleaching agents, thickeners. Product Name:Lithium 12-Hydroxystearate…